1. Overall Performance
1.1 Product complies with XF633 "Firefighter Rescue Protective Clothing" standard requirements. A copy of the inspection report from Jiangsu Special Safety Protection Product Quality Supervision and Inspection Center has been provided.
2. Style Requirements
2.1 Rescue gloves feature separated fingers. The glove body extends circumferentially. Sleeve cuff length exceeds the wrist bone by ≥25±2mm. The glove opening design prevents debris entry. Gloves are worn in coordination with the cuffs of rescue protective clothing.
2.2 Main colors of rescue gloves are orange-red and black.
3. Palm Structure meets the following requirements:
3.1 Three-layer structure consisting of inner layer, outer layer, and reinforcement layer. Outer layer uses premium split leather (first layer), color black. One-piece flip design covers finger backs. Cowhide covers fingernails, little finger, index finger outer sides, and thumb crotch. Touchscreen functionality added to index fingertip.
Inner layer uses aramid knitted fabric, color yellow. Reinforcement layer uses aramid abrasion-resistant fabric, color black, located on palm surface and thumb crotch. Buffer sponge placed inside the palm reinforcement layer.
4. Back-of-Hand Structure meets the following requirements:
4.1 Back of hand consists of aramid double-sided knitted fabric and TPR anti-collision strips.
4.2 Aramid double-sided knitted fabric: exterior orange-red, interior yellow.
4.3 TPR anti-collision strips located on back of hand, middle finger, ring finger, and little finger. They cover back-of-hand joints and finger joints below nails. Strips are one-piece overall; joint areas use separated design for flexibility. Colors are combination of black, orange-red, and gray.
4.4 Silver reflective marker on index finger. Silver reflective strip width 1cm designed below the back of hand.
4.5 Finger gussets use durable and comfortable black aramid knitted fabric. Upper part of gussets reinforced with black aramid abrasion-resistant fabric. Inner layer of thumb back uses aramid knitted fabric, color yellow. Outer layer uses durable and comfortable black terry cloth.
5. Cuff Structure meets the following requirements:
5.1 Circular cuff design. Exterior uses orange-red aramid double-sided knitted fabric. Interior wrapped with orange-red skin-friendly elastic material. Edge finished with black microfiber binding.
5.2 Exterior cuff tightened with Velcro. One-piece flip design. Velcro surface is TPR material, located on outer cuff. Colors are combination of black, orange-red, and gray. Embossed with characters "Emergency Firefighting" (Yingji Xiaofang), font is bold sans-serif, color orange-red. Each character size 8mm×8mm, spacing 1mm, centered. Interior is loop side, hook side sewn onto inner cuff.
5.3 Triangular opening below little finger side uses black aramid knitted fabric to effectively prevent entry of small particles like debris and rubble.
6. Sewing threads are aramid, specification 30-count 3-ply, colors black and orange-red.
7. Hanging loop made of high-strength woven fiber material, located on inner wrist at cuff.
8. Each glove has a permanent fabric label. Folded in half and sewn centrally at the inner back-of-hand retractable cuff area.
9. Basic specifications for firefighter rescue gloves include 4 sizes (M-XXL). Quantity for each model determined by user unit needs.
10. Technical Requirements
10.1 Abrasion Resistance: Palm material under (9±0.2) KPa pressure, not worn through after 8000 cycles of friction.
10.2 Cut Resistance: Cutting force for palm and back materials is 12N.
10.3 Puncture Resistance: Puncture force is 129 N.
10.4 Flame Retardancy: Damage length Warp 11 mm, Weft 19mm. Afterflame time: Warp 0 s, Weft 0.2S. No melting or dripping phenomena.
10.5 Heat Stability: Whole rescue glove maintained at (180±5)℃ for 5 min. No obvious surface changes, no melting, drips, or delamination. Length shrinkage rate 1.2%, Width shrinkage rate 1.7%.
10.6 Dexterity: Bare hand control percentage is 105%.
10.7 Grip Strength: Ratio of pulling force with gloves vs. without gloves ≥101%.
10.8 Donning Time: 8.0 s.
