Reinforced Gloves

1. Overall Performance 1.1 The product meets the requirements of XF633-2006 "Protective Clothing for Firefighters in Rescue Operations", and a copy of the inspection report from Jiangsu Special Safety Protection Product Quality Supervision and Inspection Center has been provided. 2. Structural Requirements 2.1 Palm Structure: Layer 1 is cowhide top grain suede reinforcement, color yellow; Layer 2 material is cowhide, color yellow; Layer 3 is waterproof layer, low-permeability waterproof membrane; Layer 4 is comfort layer, material is aramid knitted fabric. 2.2 Back-of-hand Structure: Layer 1 is cowhide top grain reinforcement, color yellow; Layer 2 material is aramid knitted fabric, color orange-red; Layer 3 is waterproof layer, low-permeability waterproof membrane; Layer 4 is comfort layer, material is aramid knitted fabric. 2.3 The back of the hand is designed with a polymer protective shell, featuring simple demolition function, capable of striking glass. 3. Technical Performance 3.1 Flame Retardancy: Afterflame time 0s for warp and weft directions, damage lengths are 19mm and 18mm respectively for warp and weft directions. 3.2 Thermal Stability: Shrinkage rates in length and width directions are 0.4% and 0.8% respectively. 3.3 Abrasion Resistance: Under 9kPa pressure, sample was not worn through after 8000 cycles of friction. 3.4 Cut Resistance: 28.4N. 3.5 Tear Resistance: Palm side warp direction 200N, weft direction 270N; Back side material warp direction 270N, weft direction 110N. 3.6 Mechanical Puncture Resistance: 132N. 3.7 Waterproof Performance: No leakage phenomenon. 3.9 Dexterity: Bare-hand control percentage is 101%. 3.9 Grip Performance: Pull force ratio is ≥102%. 3.10 Donning Performance: Donning time 5.4S.