Amphibious Electric Rescue Tool Set
The amphibious electric rescue tool set adopts an integrated electric hydraulic power source, integrating multi-functions such as cutting, spreading, pushing, and pulling. It features powerful performance and easy operation, allowing a single person to quickly conduct metal component dismantling and rescue operations at scenes of traffic accidents, building collapses, etc.
$100,000 $0
I. Product Introduction:
The amphibious electric rescue tool set adopts an integrated electric hydraulic power source, integrating multi-functions such as cutting, spreading, pushing, and pulling. It features powerful performance and easy operation, allowing a single person to quickly conduct metal component dismantling and rescue operations at scenes of traffic accidents, building collapses, etc.
II. Configuration Requirements:
▲1. The electric hydraulic cut/spread set uses lithium batteries as the power source, consisting of an electric cutter, an electric spreader, and an electric cut/spreader; each tool is equipped with at least 2 rechargeable batteries, at least 1 charger, at least 1 carrying strap, and at least 1 carrying case; battery rated voltage ≥28V, lithium batteries are of the same brand and interchangeable;
2. Battery protection rating ≥IP68; tool protection rating ≥IP58, allowing battery replacement underwater;
III. Execution Standards:
★1. Complies with the standard "General Technical Conditions for Hydraulic Dismantling Tools for Fire Emergency Equipment" (GB/T17906-2021);
IV. Performance Parameters:
1. Amphibious Electric Spreader
Rated working pressure: ≥72Mpa Minimum spreading force: ≥38KN, vertical distance from the measuring point to the tip of the spreading arm is 25mm; Maximum spreading distance: ≥740mm, maximum pulling distance: ≥640mm Weight: ≤22.8kg (excluding battery);
2. Amphibious Electric Cut/Spreader
Rated working pressure: ≥72Mpa Maximum cutting force: ≥940kN Cutting capacity: ≥φ38mm round steel (Q235A material); ≥20mm thick plate Minimum spreading force: ≥46kN Maximum spreading distance: ≥390mm Pulling distance: ≥300mm Weight: ≤18.4kg (excluding battery)
3. Amphibious Pusher
Rated working pressure: ≥72Mpa First-stage push stroke: ≥400mm Second-stage push stroke: ≥395mm First-stage pushing force: ≥140KN Second-stage pushing force: ≥70KN Closed length: ≤590mm Pushing length: ≥1385mm Weight: ≤21kg (excluding battery);
4. Amphibious Electric Cutter
Rated working pressure: ≥72Mpa Maximum cutting force: ≥940kN Cutting capacity: ≥φ40mm round steel (Q235A material); ≥20mm thick plate Maximum opening distance: ≥250mm Weight: ≤18.3kg (excluding battery)
