Rescue Boots
1. Complies with XF633-2006 "Protective Clothing for Firefighters in Rescue Operations" and GB 21148-2020 "Safety Footwear" standards; copies of corresponding inspection reports must be provided.
2. Structure
2.1 The rescue boot consists of an outsole, heel, upper with comfort layer, and insole with puncture-resistant layer.
2.2 The main material of the boot upper is black suede leather and aramid grid cloth; laces are made of aramid material.
2.3 The height from the center of the inner heel to the lowest point of the boot opening is ≤130mm. The rear quarter features an ergonomic U-shaped design with a yellow reflective pull tab.
3. Technical Requirements
▲3.1 Weight ≤1.2kg.
▲3.2 Upper thickness ≥1.30mm, upper tensile strength ≥30N/mm2. Upper tear strength: Transverse ≥130N/mm, Longitudinal ≥100N/mm.
▲3.3 Outsole: Breaking strength ≥16MPa, elongation at break ≥500%, abrasion loss ≤0.25cm3/1.61km.
3.4 Upper wear resistance: ≥20000 cycles. 3.5 Upper puncture resistance: ≥170N, upper thermal radiation resistance: Inner surface temperature rise ≤11℃.
▲3.6 Sole puncture resistance: ≥2500N. 3.7 Slip resistance: Initial slip angle ≥17°.
3.8 Flame retardancy: After-flame time 0S, char length ≤5mm.
3.9 Thermal insulation: Inner surface temperature rise ≤10℃.
3.10 Electrical insulation: Test voltage 5000V, leakage current ≤0.1mA.
▲3.11 Bonding strength of the middle layer of the outsole: ≥4.5N/mm.
Cut-resistant Gloves
1. General Requirements
1.1 Tested according to GA614-2006 "Police Cut-resistant Gloves", achieving national standard cutting resistance coefficient; gloves combining comfort, grip, and strong cut resistance.
2. Technical Requirements
2.1 Made of Kevlar and steel wire composite, Level 5 cut resistance, good elasticity, high breathability, and flexible operation.
2.2 These gloves allow gripping the blades of daggers, bayonets, etc., offering superior stab resistance. Used for armed confrontation/arrests, naval and engineer cable pulling, and handling sharp objects like stones, metals, and iron sheets.
