Water Rescue Gloves
Hand protection gloves specifically for flood and underwater emergency operations. Five-finger separated design ensures operational flexibility; fully sealed waterproof treatment and extended cuff sleeves allow compatibility with wet/dry rescue suits, blocking mud and cold water entry. Features abrasion resistance, cut resistance, puncture resistance, and high burst strength. Protects palms from scratches and punctures by rocks, debris, and metal when grabbing objects or ropes underwater, while enhancing grip friction underwater. Suitable for river channels, deep-water search and rescue, and underwater obstacle clearing operations.
$179 $0
Water Rescue Gloves:
1. Water rescue gloves shall be five-finger separated; palm and finger areas shall have materials applied to enhance outer layer abrasion resistance; glove cuff length shall extend beyond the wrist bone by no less than 25mm; all seams of the gloves shall undergo waterproof treatment; water rescue gloves shall be worn in coordination with the cuffs of water rescue suits; glove openings shall have tightening designs to restrict debris entry into the gloves.
▲2. Cut resistance performance of rescue gloves: Cutting force of palm area material of water rescue gloves ≥ 5N
▲3. Palm abrasion resistance: Under pressure of (9+0.2)kPa, should not be worn through after ≥8000 friction cycles
▲4. Back-of-hand abrasion resistance: Under pressure of (9+0.2)kPa, should not be worn through after ≥2000 friction cycles
▲5. Burst strength: Burst strength of palm and back materials of water rescue gloves ≥ 600N
▲6. Puncture resistance: Puncture resistance of palm area ≥80N
▲7. Grip performance: Ratio of pulling force with gloves vs. without gloves ≥80%
▲8. Tensile strength: Warp and weft directions of the main material of water rescue gloves shall not break under a tensile load of 150N held for 10s, and shall not transmit light.
▲14. Complies with GB24541-2022 "Hand Protection - Protective Gloves Against Mechanical Hazards", XF633-2006 "Protective Clothing for Firefighters in Emergency Rescue", and GB/T 19976-2005 "Textiles - Determination of Bursting Strength - Ball Method". Provide copies of certificates/test reports issued by nationally recognized certification/testing institutions stamped with the bidder's official seal. Items marked with "▲" must be reflected in the test report.
